Sweet Lorraine – The Speed Merchant’s 2018 Harley-Davidson Fat Bob

When a motorcycle lands in the hands of Brandon “Brawny” Holstein of The Speed Merchant (TSM), it becomes more than just a machine—it becomes a reflection of its rider’s character, style, and demands. The latest project to roll out of TSM’s garage, a 2018 Harley-Davidson Fat Bob, is the third collaboration with longtime customer Jerry Howe. After nearly two decades of trust and shared passion, this build is as much about friendship as it is about craftsmanship.
This Fat Bob wasn’t a ground-up build. Originally customized for Jerry years ago, it came back to TSM after some scratched paint needed repair. However, as Brawny and Jerry discussed updates, the project quickly evolved. “We decided to make a few changes,” Holstein explains, “like removing the hard bags and lower fairings. That lightened the bike, visually and physically.”
The changes were far from cosmetic; they transformed the motorcycle into a leaner, more aggressive machine. While maintaining some elements from its original rendition, the updates prioritized Jerry’s riding style—a spirited blend of speed, power, and endurance honed over four decades on the road.
One of the core goals of this rebuild was to create a bike that could match Jerry’s demanding pace. “Jerry rides as hard, if not harder and faster, than we do,” says Holstein. To ensure the Fat Bob delivered the performance required, the bike was outfitted with Harley-Davidson’s massive 131-inch Milwaukee-Eight motor. Swapping from the carbureted setup initially installed years ago to an EFI system was a challenge but necessary to unlock the engine’s full potential.
The new motor delivers staggering power, but performance doesn’t stop at horsepower. Brawny fine-tuned the Fat Bob with The Speed Merchant’s proprietary products, including a custom swingarm, mid-controls, triple trees, and skid plate. Each of these components was treated with custom dark bronze and grey anodized finishes, blending form and function in a way that has become the shop’s signature.
While power was essential, the build also focused on balance and handling. To improve aerodynamics and comfort for longer rides, Holstein adapted an FXRT fairing to this Softail—a nod to touring setups, but with the aggressive style Jerry prefers. The stock tank and rear fender were replaced with Low Rider-styled components to give the bike a better-proportioned stance, accommodating Jerry’s riding needs and aesthetic vision.
Suspension upgrades and precision braking components ensured that the bike was as reliable on mountain curves as it was stable on high-speed highways. “We always set out to build something that will deliver what the owner demands of it,” Brawny explains, and for Jerry, that meant a setup that could handle serious miles without compromise.
Every build comes with its challenges, and this Fat Bob was no exception. When the decision was made to switch back to EFI, it introduced new complexities. Initially stripped of side covers to accommodate a carbureted system, the bike required clever solutions to conceal the EFI wiring while maintaining its minimalist aesthetic.
“We could have put the side covers back on to hide all the electronics,” Brawny shares, “but we decided to try our best to hide it all wherever we could.” The result was a clean, purposeful look that speaks to the builder’s ingenuity and attention to detail.
Perhaps the most striking aspect of the bike is its paintwork. After lightening the bike visually by removing the lower fairings and hard bags, Brawny turned to Gerad at Valley Kustoms for the perfect finish. The result was a stunning paint design that balanced boldness with refinement. “Both Jerry and I were blown away by how well the paint turned out,” Holstein says.
The finishing touch on the air cleaner cover—a custom piece 3D-printed by Brawny and cast by Chopperdave—exemplifies the level of artistry poured into this project. It’s a small but meaningful detail, symbolizing the collaboration between builder, craftsman, and rider.
Over nearly 20 years and three custom builds, Jerry Howe and Brandon Holstein have built more than motorcycles—they’ve built a partnership. This latest rendition of the Fat Bob is a step up from their previous projects, reflecting both Jerry’s evolution as a rider and Brawny’s growth as a builder.
At its core, the build is a celebration of riding hard, riding fast, and doing so with style. It’s a machine designed to deliver on every level for its owner—a true testament to the shared vision of a craftsman and his customer.
And while The Speed Merchant continues to tackle other projects, like their entry for the 2024 FXR Tour, this Fat Bob remains a standout. It’s a bike that embodies the spirit of custom craftsmanship: functional, beautiful, and unmistakably personal. HB

Words: Clint McIntosh
Photos: Mark Kawakami












