It’s highly recommended that whenever you swap out your cams for a performance set, you should go ahead and change the pushrods and lifters as well. If you’ve been checking out the various Feuling camshaft options for Twin Cam engines we just posted, well, we took the liberty of including this set of Feuling’s Quick-Install Adjustable Pushrods for you too. 

The Feuling Twin Cam Quick-Install Adjustable pushrods feature a 3/8 OD tube with a 0.134 wall thickness and comes as a set of four pushrods. Individual length exhaust and intake pushrods, you can install this setup without the removal of rocker covers; however, installation will require quick install tubes – see Feuling #4095 for tubes. 

The Feuling Quick Install pushrods are very robust and the strength and rigidity is second only to heavy-duty one-piece pushrods. Feuling’s tube material starts out as 7/16-inch rod OD, and then gets turned down to 3/8-inch OD leaving heavy duty 7/16 – 20 threads for the base and jam nut. The jam nut slides up the pushrod, the base then loosens up into the pushrod to shorten length and allow quick install access.

The Feuling Quick-Install Adjustable Pushrods fit 1999-2017 Harley-Davidson Twin Cam engines. Individual length exhaust and intake pushrods allow the installation of the Adjustbale pushrods without the removal of rocker covers.