Arlen Ness Retro Boot Covers
$200-$300

Cover your fork tubes in these dirt tracker-styled Ness Retro Fork Boot Covers. The boots replace the OEM lower fork leg covers for ’86 and up FLT, FLH, and Heritage Softail models. Plus, they’re machined from forged 6061-T6 billet aluminum and available in black anodize or chrome to separate your bike from the rest of the pack.
Contact
Arlen Ness Motorcycles
(925) 479-6350
www.arelnness.com

Covingtons Customs Dash Insert
$99

Attention bagger owners! Covingtons Customs has released their line of CNC-machined billet aluminum dash inserts to complement your gas tank. Compatible with the stock dash assemblies, the finned insert gives your tank a little more pizzazz than the stock look. If flashy is the look you’re going for, the inserts are available in chrome, or if you like the machined look, the inserts are also available in a black anodized finish with machined edges.
Contact
Covingtons Customs
(580) 256-2939
www.covingtonscustoms.com

Hobart Handle 210 Mig Welder
$1,052

The new Handler 210 is an all-in-one MIG welder from Hobart Welding Products. This 77lb welder can put out 25 to 210 amps of welding power and can weld mild steel up to 3/8-inch and aluminum up to 1/4-inch. The Handler 210 delivers full output power with a normal 35-amp breaker and plugs into a standard 230 VAC outlet. With seven voltage taps, the Handler 210 is easy to use no matter what your experience level. An optional DP-3035 spool gun allows the user to switch between different wires with relative ease. The Handler 210 comes ready to weld with or without shielding gas, right out of the box, with no extra kits to buy.
Contact
Hobart Welding Products
(877) 626-9420
www.HobartWelders.com

Jims 131-Inch Twin Cam Race Engine
$8,260.99 (without carb)
$8,999.99 (with carb)Looking for a beefy motor? JIMS has come out with a new family of 131-inch Twin Cam Race Engines that applies to all stock and aftermarket frames. These engines have the same stroke as the JIMS 120-inch power plant bored at 4-1/2 inches, but the 131-inch motor has a larger bore diameter of 4-5/16 inches. CNC Ported Heads help feed fuel and increase airflow, and the new billet cam support plate utilizes the H-D hydraulic cam chain tensioner. JIMS also upgraded to a H-D oil pump for increased performance and decreased engine temperatures.Contact:JIMS(800) 482-6913www.jimsusa.com

Legacy Forged Wheel
$1,395-$2,195

Forge-Tec, wheel maker extraordinaire, has just introduced a new model to their already large line: The Legacy, a three-dimensional wonder of the wheel world. The Legacy is available in a wide variety of sizes and applications and is forged directly onsite out of aircraft-grade 6061-aluminum. Matching rotors, pulleys, and sprockets are available for all wheels as well. So what are you waiting for, wheel buyers?
Contact
Forge-Tec Motorcycle Wheels and Accessories
(805) 982-9820
www.forgetecmotorcycle.com