Motul’s Oil Change Kit Makes It Even Easier

Using Motul’s new Oil Change Kit, we’re going to perform a basic oil change on a 2025 CVO Road Glide ST , which includes everything you need for the service: 5 quarts of Motul Twin 20W50 100% Synthetic Motor Oil, 1 Quart Synthetic SAW 75W90 Gear Oil, 1 Quart Synthetic Primary Oil, 1 Premium Black Oil Filter with Hex Nut, 3 O-Rings, Motul Shop Rag, Disposal Funnel, and Crankcase Plaque. All in one neat package.

For this 2025 Harley-Davidson CVO, the Motor Company made some changes, which affects how you do the service. The oil pans are made out of composite plastic. They don’t have what we would think of as a traditional drain plug. They have a quarter-turn plastic plug that takes a 3/8” drive. They did locate everything right next to each other, so you can do everything from one side of the bike, which some of the previous years, you had to do the roundy round. I’m going to go ahead and pull the oil drain plug first. We’re going to let that drain, but I’ll show you the drain plug and how different it is from what we’re used to seeing. So as you can see here, it doesn’t necessarily thread in. It’s like a quarter-turn type plug. It’s got an O-ring on it, and it’s got a drive in the end of it. So you can just put your 3/8” drive socket or extension in there.
I like to use a short extension. This will allow you to get a little bit of distance, instead of just using the drive head on the ratchet. There’s no torque involved, so it’s not hard to get these things out.
Now onto the transmission drain plug, which is next to the engine oil drain plug. It’s facing down, and it’s just in front of the cross member under the frame. The trans plug on this bike is the same as the engine oil plug, so we’ll remove it the same way. With engine and trans fluids draining, next up is primary oil. The primary fluid is drained via traditional drain plug. It hasn’t moved in years. With our 5/8” socket we’ll pull the plug and let it drain.

With all three fluids drained, I’m going to reinstall the drain plugs and swap out the old oil filter with a fresh one. The primary on this bike takes one bottle of Motul 1 Quart Synthetic Primary Oil. I’ll remove the derby cover and use this Harley-Davidson Primary Oil Fill Funnel ($20.95) to add the quart of primary fluid. Easy. Now, I’ll put the derby cover back on and move over to the transmission. This CVO’s transmission also takes one quart of fluid. The dipstick is basically in the same location that it has been for a long time. You’ll notice this transmission looks a little bit different.

We have this plastic cover right here. What’s hiding is a gear indicator sensor. Previously, it was based on wheel speed, engine speed, and the computer would determine based on an algorithm, what gear you were in. That’s why it wouldn’t show up until you let it clutch out. This is a mechanical gear indicator, so it tells you what gear you’re in the second you shift. This bike does have a plastic transmission dipstick. Which is not a new thing, but one note of caution, if you’re doing this yourself, be very careful when you reinstall this not to cross-thread it.

Being that it is plastic and the transmission is aluminum, it will destroy the threads on this rather quickly if you don’t start it squarely and get the threads to where it’s nice and easy by hand before you put a tool on it. We’re going to go ahead and fill this up with 1 quart of Motul Synthetic SAW 75W90 Gear Oil.
Last but not least is the engine oil. We’ve already primed our oil filter and popped it on. The engine oil fill port on these is in the same location. Note: if you look in the H-D service manual, it calls for 5 quarts. If you put 5 quarts in this thing, you will overfill it. I promise. Five quarts is under the assumption that the system is dry–there’s nothing in the crank case, the oil coolers, nowhere. But that’s not usually the case.

We used a little oil from this quart to prime the oil filter, so we’ll add the rest to the engine, and then continue filling the rest of the 4-1/2 quarts until we’re full. We’re going to put all but a half quart of what we have remaining, and then we’ll test ride the motorcycle, check our level, and top it off to where it reads correctly on the dipstick. The Motul bottles have a site window so you can check your levels if you’re unsure how much of that last quart you have left.
All right, we test rode the bike, checked the oil, topped it off and all is good. Motul offers great products. We use their stuff exclusively here at the shop. This isn’t just a tech article on something that somebody asked us to do. I’ve tested this stuff myself on the dyno. We’ve sent samples out. It’s a great oil. I hope you guys found this article informative, and I hope you’re enjoying the current issue of Hot Bike. We’ll see you next time. HB
SOURCES:
Motorwitch Industries
motorwitchindustries.com
Motul USA
shopmotul.com
